BHPS-1416-2DT Pressurized Turntable Automatic Sandblasting Machine

Scope of Application:

This model is suitable for small and medium-sized sandblasting workpieces that cannot be collided, must not have minor scratches,

have a high daily processing volume, require high sandblasting efficiency, high equipment automation, simple operation, and full 

omnidirectional surface sandblasting treatment;

Features:

1. Intermittent operation, with a large turntable intermittently rotating and a small turntable self-rotating, achieving full omnidirectional sandblasting coverage and uniform results;

2. Pressurized sandblasting design, equipped with a pressure tank and pressurized sandblasting guns, capable of blasting stainless steel shot, steel grit, and other metallic abrasives;

3. PLC intelligent control, with all functions except start and emergency stop controlled via the touch screen, featuring a simple interface and easy operation;

4. Split-type filter dust removal box design, which can be placed 360 degrees around the sandblasting host to suit different processing sites;

5. Uses a bucket elevator to recycle and reuse abrasives, expanding the range of abrasive choices;  

6. Employs secondary cyclone separation technology for sand and dust separation, saving abrasive usage rate;

Main Parameters:

Type:              Pressurized Turntable Automatic Sandblasting Machine          

Model:              BHPS-1416-2DT (4 Stations)           

Overall Dimensions:              1400X1600X3420

Dust Removal Box Dimensions:              1520X950X 2490 

Dust Removal Fan Power:                5.5Kw

Lifting Motor Power:                 1.5Kw 

Turntable Drive Motor:                 1.5Kw

Total Power:                   8.5Kw

Number of Guns:                  2 (Pressurized Type)

Power Requirements:            380V/50Hz Three-Phase 5-Wire System

Air Source Requirements:    Air pressure greater than 7bar(kg/cm²), each gun requires an air source of at least 1m³/min

Factory Real Photos

This machine is a non-standard model, customized according to customer products.